![[ANSYS, Inc. Logo]](https://www.afs.enea.it/project/neptunius/docs/fluent/html/udf/fluentlogo.gif)
|
|
|
The macros listed in Table 3.2.20- 3.2.23 can be used to return real face variables in SI units. They are identified by the F_ prefix. Note that these variables are available only in the pressure-based solver. In addition, quantities that are returned are available only if the corresponding physical model is active. For example, species mass fraction is available only if species transport has been enabled in the Species Model dialog box in ANSYS FLUENT. Definitions for these macros can be found in the referenced header files (e.g., mem.h).
Face Centroid (
F_CENTROID)
The macro listed in Table 3.2.20 can be used to obtain the real centroid of a face. F_CENTROID finds the coordinate position of the centroid of the face f and stores the coordinates in the x array. Note that the x array is always one-dimensional, but it can be x[2] or x[3] depending on whether you are using the 2D or 3D solver.
The ND_ND macro returns 2 or 3 in 2D and 3D cases, respectively, as defined in Section 3.4.2. Section 2.3.15 contains an example of F_CENTROID usage.
Face Area Vector (
F_AREA)
F_AREA can be used to return the real face area vector (or `face area normal') of a given face f in a face thread t. See Section 2.7.3 for an example UDF that utilizes F_AREA.
By convention in ANSYS FLUENT, boundary face area normals always point out of the domain. ANSYS FLUENT determines the direction of the face area normals for interior faces by applying the right hand rule to the nodes on a face, in order of increasing node number. This is shown in Figure 3.2.1.
ANSYS FLUENT assigns adjacent cells to an interior face ( c0 and c1) according to the following convention: the cell out of which a face area normal is pointing is designated as cell C0, while the cell in to which a face area normal is pointing is cell c1 (Figure 3.2.1). In other words, face area normals always point from cell c0 to cell c1.
Flow Variable Macros for Boundary Faces
The macros listed in Table 3.2.22 access flow variables at a boundary face.
Valentina isn’t just another 1/6 or 1/4 scale kit. She represents the perfect intersection of beauty, tactical grit, and the "cyberpunk soul" that TTL does so well. Depending on the specific release (TTL has produced variants like "Valentina: Recon Unit" or "Valentina: Sniper Ver."), the character design tells a consistent story: a lone operative in a rain-soaked, neon-lit future.
However, if you want a centerpiece for your display case that looks like it stepped out of a Ghost in the Shell or Blade Runner poster, Valentina is one of the best resin kits on the market. She is elegant, dangerous, and utterly cool. ttl model valentina
If you are a fan of high-quality resin kits, dystopian sci-fi aesthetics, or simply appreciate the art of hyper-detailed modeling, you’ve likely heard of TTL Models . While TTL has produced a range of stunning figures, one name that consistently grabs attention in the community is Valentina . Valentina isn’t just another 1/6 or 1/4 scale kit
The TTL Models Valentina is not for beginners. If you are used to Bandai or Games Workshop push-fit models, this will be a rude awakening. You will need epoxy putty, a Dremel, and a lot of patience. However, if you want a centerpiece for your
Disclaimer: TTL Models produces unlicensed and licensed resin kits. Availability varies by region. Always buy from reputable hobby shops to avoid recasts.
See Section 2.7.3 for an example UDF that utilizes some of these macros.
Flow Variable Macros at Interior and Boundary Faces
The macros listed in Table 3.2.23 access flow variables at interior faces and boundary faces.
| Macro | Argument Types | Returns |
| F_P(f,t) | face_t f, Thread *t, | pressure |
| F_FLUX(f,t) | face_t f, Thread *t | mass flow rate through a face |
F_FLUX can be used to return the real scalar mass flow rate through a given face f in a face thread t. The sign of F_FLUX that is computed by the ANSYS FLUENT solver is positive if the flow direction is the same as the face area normal direction (as determined by F_AREA - see Section 3.2.4), and is negative if the flow direction and the face area normal directions are opposite. In other words, the flux is positive if the flow is out of the domain, and is negative if the flow is in to the domain.
Note that the sign of the flux that is computed by the solver is opposite to that which is reported in the ANSYS FLUENT GUI (e.g., the Flux Reports dialog box).
Previous:
3.2.3 Cell Macros
